PRODUCTSALLOY STEEL
AKA just “stainless”, stainless steel is steel that has been alloyed to maximize it’s corrosion resistance. It is used in applications where rust is a greater concern then strength. For more information – or to start your order – contact us today.
BAR
| Flat | Grades: 303, 304/304L, 316/316L Type: Annealed, Cold Finished, Cond A, Edge Conditioned, True Mill Edge | Thicknesses: 0.125" thru 2" Widths: 0.5" thru 8" |
| Half Round | Grades: 304 Type: Annealed, Cold Finished, Cond A | Diameter: 0.375" Stock Length: 20’ |
| Hexagon | Grades: 303, 304/304L, 316/316L Type: Annealed, Cold Finished, Cond A | Diameter: 0.250" thru 2.000" Stock Lengths: 11’ thru 13’ |
| Round | Grades: 303, 304/304L, 316/316L, 410, 416, 440C, 13-8 PH, 15-5 PH, 17-4 PH (630), H1150, 17-4 PH Double H1150, NITRONIC 60 Type: Accuracy, Annealed, BSQ, Coiled, Cold Finished, Cond A, Hot Rolled, Rough Turned, TGP | Diameter: 0.125" thru 12" Stock Lengths: 10’ thru 22’ |
| Square | Grades: 303, 304/304L, 316/316L Type: Annealed, Cold Finished, Cond A | Diameter: 0.125" thru 2" Stock Lengths: 10’ thru 17′ |
PIPE
| Schedule 10 | Grades: 304/304L, 316/316L Type: Welded | OD: 0.5" thru 10" Stock Length: 17’ thru 24’ |
| Schedule 40 | Grades: 304/304L, 316/316L Type: Seamless, Welded | OD: 0.25" thru 10" Stock Length: 17’ thru 24’ |
| Schedule 80 | Grades: 304/304L Type: Seamless, Welded | OD: 0.75" thru 2" Stock Length: 17’ thru 24′ |
STRUCTURAL SHAPES
| Angle | Grades: 304/304L, 316/316L Type: Extruded, HRAP, Laser Fused | Sizes: 0.75" x 0.75" thru 6" x 6" Thicknesses: 0.125" thru 0.5" |
| Channel | Grades: 304/304L, 316/316L Type: Extruded, HRAP, Laser Fused | Depths: 1.5" thru 8" |
| I-Beam | Grades: 304/304L Type: Extruded, HRAP, Laser Fused | Depths: 3" thru 12.31" Flange Widths: 2.375" thru 4.03" |
| Tee | Grades: 304 Type: Extruded Laser Fused | Depths: up to 4" Flange Widths: up to 4" |
TUBE
| Rectangle | Grades: 304, 316L Type: 180 Polish, Mill Finish, Welded-Ornamental | Widths 0.5" thru 20" Wall Thickness: up to 0.5" |
| Round | Grades: 1010, 1020, 1026, 4130, 1008/1010, 1010/1015, 1010/1020, 4140, A500 Gr B/C, J525 Type: Annealed, CDS, CREW, DOM, HFS, HREW, Hydraulic Tubing | OD: 0.1875" thru 6" Wall Thickness: up to 0.25" |
| Square | Grades: 304, 304/304L, 316L Type: 180 Polish, Mill Finish, Welded-Ornamental | Widths 0.5" thru 6" Wall Thickness: up to 0.25" |
COIL
| Austenitic (Non-Magnetic) | Grades: CS-B Type: Aluminized, Electro-Galvanized, Galvanized, GalvannealedaGrades: 201, 201LN, 301, 304/304L, 309, 310/310S, 316/316L, 317L, NITRONIC 30 Type: 2B, 2D, #3/#4 Polish, Bright Annealed, HRAP | Thicknesses: 28 ga thru 0.5" Widths: 30", 36", 42", 48", 60", 72" |
| Ferritic (Magnetic) | Grades: 409, 430, 439, 441 Type: 2B, 2D, #3/#4 Polish, Bright Annealed, HRAP | Thicknesses: 26 ga thru 0.25" Widths: 30", 36", 48", 60" |
PLATE
| Coil Mill Plate | Grades: 201LN, 2205, 304/304L, 316/316L, NITRONIC 30 Type: 2B, HRAP | Thicknesses: 0.1875" thru 0.75" Widths: 36", 48", 60", 72", 96" |
| Plate Mill Plate | Grades: 304/304L, 316/316L Type: HRAP | Thicknesses: 0.1875" thru 2.25" Widths: 48", 60", 72", 96" |
| Tread Plate | Grades: 304 Type: Diamond Pattern B | Thicknesses: 0.125" thru 0.50" Widths: 36", 48", 60" |
SHEET
| Austenitic (Non-Magnetic) | Grades: 201, 201LN, 301, 304/304L, 309, 310/310S, 316/316L, 317L, NITRONIC 30 Type: 2B, 2D, #3/#4 Polish, Bright Annealed, HRAP | Thicknesses: 28 ga thru 0.5" Widths: 30", 36", 42", 48", 60", 72" |
| Ferritic (Magnetic) | Grades: 409, 430, 439, 441 Type: 2B, 2D, #3/#4 Polish, Bright Annealed, HRAP | Thicknesses: 28 ga thru 0.5" Widths: 30", 36", 42", 48", 60", 72" |
Are you ready to get started with your quote?
